Stronghold ICF - FX Series

FX Flat Top/Flat Top Block Product Specifications

 

FX-Series Double Flat Top Block

The Double Flat Top Block is used as the top course of walls, when a maximum about of installation is desired, but still wanting a smooth screeding surface for leveling the top of the wall once the concrete is poured.

Product Specifications for Stronghold ICF FX-Series Straight Block

Overview

The Double Flat Top Block is used as the top course of walls, when a maximum ease of installation is desired, with a smooth screeding surface for leveling the top of the wall once the concrete is poured. The foam panels are 1.5lb density and 2.75" thick with reversible interlocking foam teeth on the bottoms of the panels. The panels are held in a structural position with 6 fixed webs, spaced 8" apart.

 

6" FX Double Flat Top Block

  • Core Width: 6" (152mm)
  • Form Width: 11.5" (292mm)
  • Form Length: 48" (1219mm)
  • Form Height: 16" (406mm)
  • Surface Area: 5.33sf (929cm^2)
  • Concrete Volume: 0.99yd^3 (0.076m^3)
  • Concrete Volume: 0.11yd^3 (0.081m^3)

8" FX Double Flat Top Block

  • Core Width: 8" (203mm)
  • Form Width: 13.5" (343mm)
  • Form Length: 48" (1219mm)
  • Form Height: 16" (406mm)
  • Surface Area: 5.33sf (929cm^2)
  • Concrete Volume: 0.132yd^3 (0.101m^3)
  • Concrete Volume: 0.15yd^3 (0.114m^3)

 

 

Get a Quote

 

 

Copyright © Stronghold ICF LLC. All rights reserved. 2016–

Designed & Optimized by RAIIZ - our bar is higher.

Product Specifications for Stronghold ICF FX-Series Straight Block