Stronghold ICF - FX Series

FX Straight Block Product Specifications

 

FX-Series Straight Block

ICF Straight blocks, sometimes referred to as standard blocks, make up between 75%-85% of a typical ICF project.

Product Specifications for Stronghold ICF FX-Series Straight Block

Overview

Straight blocks, sometimes referred to as standard blocks, make up between 75%-85% of a typical ICF project. The FX Series Straight blocks are made from 2 parallel panels of 16" tall x 48" 1.5lb. density EPS foam that is 2.75" thick with reversible interlocking foam teeth along the top and bottom panel edges. The panels are held in a structural parallel position with 6 fixed webs, spaced 8" apart. When the blocks are stacked together they lock together not only with the foam teeth but also with plastic teeth on the top and bottom ends of each web.

 

6" FX Straight Block

  • Core Width: 6" (152mm)
  • Form Width: 11.5" (292mm)
  • Form Length: 48" (1219mm)
  • Form Height: 16" (406mm)
  • Surface Area: 5.33sf (929cm^2)
  • Concrete Volume: 0.99yd^3 (0.076m^3)

8" FX Straight Block

  • Core Width: 8" (203mm)
  • Form Width: 13.5" (343mm)
  • Form Length: 48" (1219mm)
  • Form Height: 16" (406mm)
  • Surface Area: 5.33sf (929cm^2)
  • Concrete Volume: 0.132yd^3 (0.101m^3)

 

 

Get a Quote

 

 

Copyright © Stronghold ICF LLC. All rights reserved. 2016–

Designed & Optimized by RAIIZ - our bar is higher.

Product Specifications for Stronghold ICF FX-Series Straight Block